| Anzahl | Part | Bezeichnung | Anmerkung | Hersteller | Hersteller-Nr. | Anmerkung |
| 1 | IC1 | Prozessor PIC 16F684-I/SL, SO-14 | Microchip | 16F684-I/SL | (-40°C to +85°C) | |
| Microchip | 16F684-E/SL | (-40°C to +125°C) | ||||
| 1 | IC2 | Spannungsregler 78L05, SO-8 | Taiwan Semi. | TS78L05CS RL | 4%, Umax=35V | |
| National Semi. | LM78L05ACMX | 5%, Umax=35V | ||||
| ST | L78L05ACD13TR | AC = 4%, C = 8%, Umax=30V !!! | ||||
| ON Semi. | MC78L05ABDR2G | 5%, Umax=30V !!! | ||||
| 1 | IC3 | Treiber ULN2803, SO-18 | Texas | ULN2803ADWR | Reel (2000) | |
| Texas | ULN2803ADW | Tube (40) | ||||
| Toshiba | ULN2803AFWG | |||||
| 1 | OK1 | Optokoppler 6N137, Schnell, DIL-8 (Gullwing SMD) | SMD Gullwing | AVAGO | 6N137-300E | |
| LITEON | 6N137S-L | |||||
| ISOCOM | 6N137SM-I | |||||
| FAIRCHILD SEMICONDUCTOR | 6N137SDM | |||||
| 8 | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 | LED, 1206, Gelb | Kingbright | KPC-3216YD | ||
| Kingbright | KP-3216YD | |||||
| 2 | LED10, LED20 | LED, 1206, Gruen | Kingbright | KPC-3216SGD | ||
| Kingbright | KP-3216SGD | |||||
| 1 | T1 | Transistor NPN BC817, SOT23 | NXP | BC817-40 | Marking: 6C | |
| ON Semi. | BC817-40LT1G | Marking: 6C | ||||
| 1 | D1 | Diode Schottky, 3A, 40V, SMA (SK34) | DIOTEC SEMICONDUCTOR | SK34 | 3A, 40V | |
| 1 | D20 | Doppel-Diode BAV99, SOT23 | NXP | BAV99 | Marking: A7 | |
| Infineon | BAV99 | |||||
| Taiwan Semi. | BAV99 | |||||
| ON Semi. | BAV99LT1G | |||||
| 1 | G1 | Gleichrichter 8.5 x 10 mm, 1A, schnell, z.B. HDBLS101G...HDBLS104G / B40FS..B80FS | Taiwan Semi. | HDBLS101G - HDBLS107G | Recovery Time 50ns | |
| Diotec | B40FS - B80FS | Recovery Time 300ns | ||||
| 1 | C1 | Elko 220uF, 35V, SMD-F, D=8mm. H=10.2mm | Panasonic | EEVFK1V221P | Reel(1000) | |
| Würth | ASEE105221M035DVCTEB000 | |||||
| UWT1V221MNL1GSNICHICON | UWT1V221MNL1GS | |||||
| 1 | C3 | Keramik-C 47pF (NPO), 0805 | diverse | 0805 47pF, 50 VDC, 5,0%, C0G (NP0) | ||
| Kemet | C0805C470J5GACTU | (0805, NP0, 5%, 50VDC) | ||||
| Multicomp Farnell | MCCA000326 | (0805, NP0, 5%, 50VDC) | ||||
| Yageo | CC0805JRNPO9BN470 | (0805, NP0, 5%, 50VDC) | ||||
| 4 | C2, C4, C5, C20 | Keramik-C 100nF (X5R/X7R), 1206 | Samsung | CL31B104KBCNNNC | (1206, X7R, 10%, 50VDC) | |
| Kemet | C1206C104K5RACTU | (1206, X7R, 10%, 50VDC) | ||||
| Multicomp Farnell | MCCA000478 | (1206, X7R, 10%, 50VDC) | ||||
| AVX | 12065C104KAT2A | (1206, X7R, 10%, 50VDC) | ||||
| 1 | R13 | Widerstand 180 R, 1206 | diverse | 1206, 1% | ||
| Yageo | RC1206FR-07180R | 1206, 1% | ||||
| Multicomp Farnell | MC0.125W12061%180RFR | 1206, 1% | ||||
| Vishay | CRCW1206180RFK | 1206, 1% | ||||
| 8 | R1, R2, R3, R4, R5, R6, R7, R8 | Widerstand 220 R, 1206 | diverse | 1206, 1% | ||
| Yageo | RC1206FR-07220R | 1206, 1% | ||||
| Multicomp Farnell | MC0.125W12061%220RFR | 1206, 1% | ||||
| Vishay | CRCW1206220RFK | 1206, 1% | ||||
| 1 | R11 | Widerstand 470 R, 1206 | diverse | 1206, 1% | ||
| Yageo | RC1206FR-07470R | 1206, 1% | ||||
| Multicomp Farnell | MC0.125W12061%470RFR | 1206, 1% | ||||
| Vishay | CRCW1206470RFK | 1206, 1% | ||||
| 3 | R12, R20, R21 | Widerstand 1 kR, 1206 | diverse | 1206, 1% | ||
| Yageo | RC1206FR-071K | 1206, 1% | ||||
| Multicomp Farnell | MC0.125W12061%1KFR | 1206, 1% | ||||
| Vishay | CRCW12061K00FK | 1206, 1% | ||||
| 2 | R10, R22 | Widerstand 10 kR, 1206 | diverse | 1206, 1% | ||
| Yageo | RC1206FR-0710K | 1206, 1% | ||||
| Multicomp Farnell | MC0.125W12061%10KFR | 1206, 1% | ||||
| Vishay | CRCW120610K0FK | 1206, 1% | ||||
| 1 | R99 | Widerstand 22 kR, 1206 | diverse | 1206, 1% | ||
| Yageo | RC1206FR-0722K | 1206, 1% | ||||
| Multicomp Farnell | MC0.125W12061%22KFR | 1206, 1% | ||||
| Vishay | CRCW120622K0FK | 1206, 1% | ||||
| 1 | F1 | Sicherung 500 mA, SMD | Littelfuse | 0154.500DR | SMF OMNI-BLOK | |
| 8 | K1, K2, K3, K4, K5, K6, K7, K8 | Relais Omron G5V-1 12V | ||||
| 1 | SW1 | Taster 9313 SMD 6x6 | Schurter | LSG 1301.9313 | ||
| Omron | B3FS-1002P | ('P'-Reel, sonst = Beutel | ||||
| Tyco | 1437565-9 | FSM1LPATR, Black (Tape) | ||||
| Tyco | 1-1437565-8 | FSM1LPTR, Brown (Tape) | ||||
| 10 | X1, X2, X3, X4, X5, X6, X7, X8, X9, X11 | Stecksystem 2-polig, RM 3.5 mm Stecker (PCB) | mit AKL 169-02 | RIA | 311821 02 | PCB Buchse 90° |
| 10 | X1A, X2A, X3A, X4A, X5A, X6A, X7A, X8A, X9A, X11A | Stecksystem 2-polig, RM 3.5 mm Buchse (Kabel) | mit AKL 182-02 | RIA | 311601 02 | Stecker f. Kabel |
| 1 | J1 | Stiftleiste 1x3-polig, RM 2.54 mm | SL 1X40G 2,54 = 1x 40-pol. | |||
| 1 | X10 | Stiftleiste 2x3-polig, RM 2.54 mm | SL 2X40G 2,54 = 2x 40pol. | |||
| 1 | Z1 | DIN-Schienen-Halter | optional | |||
| 1 | J1A | Jumper 2-pol. RM2.54mm | ||||
| 1 | U$3 | kein Bauteil | ||||
| 1 | U$5 | kein Bauteil | ||||
| 1 | U$4 | kein Bauteil | ||||